DRYLOK® Extreme Masonry Waterproofer

USA’s #1 Selling Masonry Paint
15 Year Warranty

If water is leaking through existing masonry or you need to protect new construction from water infiltration, our proprietary formula is GUARANTEED to stop the water.

Unlike ordinary paint that simply adheres to a surface and can be forced off by incoming water pressure, DRYLOK® Extreme Masonry Waterproofer actually penetrates the pores in that surface, bonding to the masonry and creating an impenetrable barrier.

Product Overview

Waterproof interior, exterior, above or below-grade walls including basements, retaining walls, and bare concrete swimming pools, foundations, and more

• GUARANTEED to stop water – withstands 15 pounds of hydrostatic pressure (PSI) equivalent to a wall of water 33 feet high
• Fully transferrable 15 Year Warranty
• Withstands Category 4 hurricane winds
• Helps protect against radon gas penetration by reducing vapour transfer
• Green Wise® Certified
• Low-odour formula complies with all current VOC requirements
• The breathable film will not trap moisture in the masonry
• Easy cleanup with warm, soapy water

Product Features

• Tintable, bright white, smooth finish formula features Flexible Encapsulated Polymers for the ultimate in waterproof protection
  The incorporation of a green biocide helps the dry paint film resist mildew growth
• Sizes: 3.8L and 18.9L
• Coverage: 3.7 – 5 square metres per litre for each coat
• No pre-mixing or pre-wetting
• Application tools: brush or roller (preferred for first coat), sprayer
• Dry Time: 1-2 hours
• Coats: minimum of 2 coats for Warranty Coverage to apply
• Recoat time: 3 hours
• After 24 hours, DRYLOK® will accept a decorative topcoat using good quality latex paint

Surfaces

Masonry walls, brick, stucco, cinder and concrete blocks, poured concrete.

Sizes – 3.8L, 18.9L